PLL frequency synthesizer oscillator circuit with MB87014A

PLL synthesizing oscillator Circuit

Synthesizer oscillation circuit to introduce here is using the PLL frequency synthesizer (MB87014A). It is possible to make oscillate the stable high frequency signal.
    The PLL is the abbreviation of Phase Locked Loop. In the operation of the PLL, it compares the frequency of the reference frequency oscillator and the frequency of the voltage controlled oscillator by the phase. When there is a difference of the phase, it works as if to control the VCO and to lose the difference. It controls repeatedly(loop) like the oscillation frequency  phase comparison  voltage control  oscillation frequency.

It uses the crystal oscillator with the high stability for the reference frequency oscillator. Because it isn’t possible to make oscillate the high frequency only with the crystal oscillator, the stable high frequency signal can be made by comparing the frequency with the divider changing into the comparatively low frequency.

The frequency which was stable as the characteristic of the PLL synthesizer can be gotten but there is a point which can change the output frequency in changing the dividing percentage of the divider as another characteristic.
The circuit to introduce this time makes the dividing percentage the fixation.

It made the oscillator to introduce this time in the purpose to use as the oscillator of the transceivers for 144 MHz to use by the amateur radio. That the output frequency is 119.3 MHz is due to the following reason.
This PLL oscillator is used as the sub oscillator of the main PLL oscillator.