Here is simple LED-power audio amplifier circuit with MOSFET amplifier TL071C and 2 may be up to 45 W into 8 ohms.
For MOSFET IRFP240 and IRFP9240 are used safety with device can now be these modification.
The scheme is at the request SILICONIX and the voltage change of 2 serial resistances from suppliers operating voltage amplifier driver was inserted.
MOSFET must be mounted on at least one condenser 1K / W.
Amplifier efficiency is 70%, the reduction in the frequency distortion in more than 0.2% at 20 Hz at 8 ohms and 10W.
With a supply voltage in the range of + – 30V, can supply audio amplifier MOSFET 45W into 8 ohms and 70W into 4 ohms.
Remember that the sound amplifier is short, so all you can check the radio button is protected, whether the speaker is connected.

One Response
Stay in touch with the conversation, subscribe to the RSS feed for comments on this post.
I NEED CIRCUIT